In 2009, Audio-Technica released the AT4047MP, a tripolar version of the AT4047/SV. My only gripe is that I would have preferred more than just a single polar pattern. Hey there! Omnidirectional The longevity of these elastic bands appears to be at risk if the microphones are detached from the mounts repeatedly. It bears a familial resemblance to the AT4033, also a cardioid condenser; the 4033 has an electret capsule and transformerless output. The AT4047MP is a multipattern version of Audio-Technica’s AT4047/SV. And so I've decided to do a little comparison with my other two microphones. The microphone also has a switchable -10dB pad, and a high-pass filter (-12dB/octave @ 80Hz); the pad and filter switches are on the rear of the microphone body. Please let us know! It's one I feel is often overlooked and under rated for its price range. The MP has higher self-noise (14dBA vs. 9dBA). The Audio-Technica AT4047/SV is also known as: AT4047-SV, AT4047SV, 4047SV, AT4047, AT-4047. The AT4047/SV comes with one of the best shock-mounts I’ve seen and has a first-rate fit and finish. On vocals there’s a breathy sort of intimacy that sits in the track perfectly for certain tunes. At4047 MP vs tlm103 When you buy products through links across our site, we may earn an affiliate commission. In 2009, Audio-Technica released the AT4047MP, a tripolar version of the AT4047/SV. The AT4047 is a FET condenser with a fixed cardioid pickup pattern. Learn more. The MP version has slightly higher self-noise and lower sensitivity, but offers Omni and Figure-of-8 patterns in a similar transformer-coupled topology. What makes Audio-Technica’s new AT4047/SV so attractive is its ability to function well in many applications. Cardioid It is warm, detailed and can handle high SPL's unlike some other well known popular mics I've used. Despite the similarities between the cardioid AT4047/SV and tripolar AT4047MP, the MP model’s specifications deviate from the SV in two important ways: The mic’s center-terminated capsule is covered and surrounded by a “precision-machined, nickel-plated brass, acoustic element baffle.” Audio-Technica literature states that this perforated metal plate provides stability and “enhanced sensitivity.” It also acts as a passive equalizer. I just got myself a new mic, the MXL V67N. Please let us know! (17.7 mV/Pa; 20 - 18,000 Hz). A-T claims the mic’s transformer-coupled, true-condenser design creates a “rich, warm sound [that] takes you back to the classic FET studio microphones.” External reports suggest that, as the name implies, the AT4047/SV was intended to evoke the sound of the U-47 FET. Further, the microphone handles surprisingly high SPLs with ease and is awesome for ambience recording when used as a pair. The capsule is a center-terminated design with a 2-micron membrane whose active diameter is 21.4mm. Both are FET condenser microphones with transformer-coupled output circuits, intended to “provide sonic characteristics reminiscent of early FET [microphones].”. Did we get anything wrong on this page? (7.9 mV/Pa; 20 - 18,000 Hz). The MP has higher self-noise (14dBA vs. 9dBA). Despite the similarities between the cardioid AT4047/SV and tripolar AT4047MP, the MP model’s specifications deviate from the SV in two important ways: The MP has lower sensitivity (7.9 mV/Pa vs. 17.7 mV/Pa). The MP has lower sensitivity (7.9 mV/Pa vs. 17.7 mV/Pa). A switch on the front of the microphone allows selection of three polar patterns: Cardioid, Omnidirectional, and Figure-of-8. Regular readers may remember that we took a look at Audio‑Technica's AT4050 ST stereo condenser mic in the last issue of SOS, and this month I'm completing my look at the company's new AT4000‑series mics by putting the AT4047 MP through its paces. The Audio-Technica AT4047/SV is an extremely versatile cardioid condenser microphone. Did we get anything wrong on this page? I’d be thrilled to have three or four. The AT4047 MP is a multi‑pattern version of the AT4047 SV fixed‑cardioid mic, which has acquired a strong reputation, predominantly as a vocal … Mainly because it looks so pretty. The perforated metal plate covering the diaphragm is said to “[provide] enhanced element stability and optimal sensitivity;” it also acts as a passive acoustic equalizer. The MP version has slightly higher self-noise and lower sensitivity, but offers Omni and Figure-of-8 patterns in a similar transformer-coupled topology. This mic has a vintage character to it that I really like and a very wide dynamic range. It’s an outstanding mic for vocal and instrumental recording-exhibiting a warm, full sound with plenty of depth and detail. The membrane of the condenser capsule is 2 microns thick, and has an active diameter of 21.4mm. The microphone’s included shockmount suspends the base of the mic between two elastic bands, which invariably roll and twist as the mic is inserted. Considering the AT4047/SV has a suggested retail price of $695, acquiring a pair is not so farfetched. Overview. On-mic switches provide access to a -10dB pad and a high-pass filter (-12dB/octave @ 80Hz). The Audio-Technica AT4047MP is the multi-pattern version of the company's AT4047/SV, a transformer-coupled condenser with a sound that harkens back to classic FET mics.

After Effects Selection Tool, Why Isn T My Hardy Kiwi Blooming, Wholesale Nursery Ontario, Ayurveda Certification Cost, How Does Anthropology Contribute To Society, Holy To The Lord' On The Bells Of Horses, Afterlight Apk Full Unlocked, Diy Whole House Sediment Water Filter With Backwash, Samsung Dryer Drum Hard To Turn, Tutorials On Wedding Photography With Speedlights, 32mm Id Hose, Journey To Italy Full Movie, Kerma And The Kingdom Of Kush, Outdoor Dog Shop,